From humble beginnings in 1971, Hughes Performance has become distinguished as a leader in the industry. We are proud to give you the race products catalog that represents our latest technology. The Hughes Motorsports race team tests all product and assures you of their quality and durability.

Our race team covers everything from super street to super eliminator. The team continually gives us invaluable information for the research and development of new products that are unparalleled by other manufacturers.

Product quality, latest innovations, and already tested applications give you the advantage to win more races.

Customer service is the cornerstone of this family company. We pride ourselves in treating you the way we want to be treated.

Everyone in our team organization - from research to shipping - has one goal in mind: Customer Satisfaction. Experience for yourself why so many racers around the world are changing to Hughes Performance race products.

www.hughesperformance.com

Outlaw 10.5

Accufab, Inc. is a manufacturer of after market performance parts, specializing in high-flow throttle body designs. All of our top-quality billet aluminum, precision CNC machined parts are proudly made in the USA at our facility in Ontario, California. Also, we feel it's important to support our local community and do so by keeping virtually all of our outside processes, such as anodizing, polishing, engraving etc... in the nearby area. From there, all parts are hand assembled and inspected by qualified Accufab staff & quickly delivered to your front door!

www.accufabracing.com

Mickey Thompson Tires is the leader in drag racing tires. Whether you need a Drag Slick, a Front Runner, DOT approved Drag Tire, Drag Radial, Off-Road Tire, or Performance Street Tire, Mickey Thompson has the tire for your application. Most of the firsts and official records in Heads-Up street drag racing have been set on Mickey Thompson Tires. The first DOT tire ever to go in the 7's and the 6's, the first DOT tire to ever exceed 200mph, the first 10.5 tire to go in the 7's....and the records keep on going. Check out the PSCA race cars, over 80% of their cars use them, and their champions insist on them!

www.mickeythompsontires.com

Proven performance today...
and into the next century.

When we say "proven" at Edelbrock we mean it. Many hours of research, design and testing go into each Edelbrock product before it goes to market. Through teamwork, good equipment and dedication, Edelbrock designs and manufactures products that deliver maximum performance.
Edelbrock engineers are enthusiasts who have joined our team because of our outstanding reputation for producing remarkable products. They are a combination of racing veterans and scholars. Jack Mayberry heads our Engineering Department. Dr. Rick Roberts earned his PhD in 1985 from Cal Tech and is our Chief Engineer. Our group of dyno technicians are "hands-on" engine builders who are putting together their own engines at home as well as at work. Whatever their background, our team has one thing in common... the love of performance.

Edelbrock's products include:
Aluminum intake manifolds, aluminum performance street and racing cylinder heads, aluminum water pumps, carburetors, data acquisition computers, nitrous systems, tubular headers & exhaust systems, chrome & aluminum engine accessories, and more.
Check out Edelbrock's website for a complete listing of their products: www.edelbrock.com

PSCA racers use Edelbrock: Many time True Street winner, Manny Figueroa, Dave "Coppertop" Murray, Gary Brandt Doug Sikora, Mike Nordahl, and many more. Stop by all their pits and check out Edelbrock's proven products.

www.edelbrock.com 310-781-2222

BORLA PERFORMANCE INDUSTRIES is the leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such "concours classics" as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.

BORLA is committed to providing world class exhaust products which surpass the expectations of our customers. To that end, our facility is complete with a state-of-the art test and development center where we are continually improving our manufacturing efficiency and standards. We have pioneered a variety of improvements in the design of performance exhaust systems. Alex Borla currently holds three US patents for innovative exhaust system technology, and the company has won numerous "Best New" product awards in the industry. Every BORLA header and cat-back(tm) system is made from T-304 stainless steel (superior to 409 or aluminized steel) employing mandrel-bent tubing, all-welded construction, and is designed for accurate fit and easy installation. Over 26 years experience and special merge collector technology provide the ultimate in power and endurance.

The performance advantages of a BORLA are widely recognized. The top engine builders in the racing world rely on BORLA exhaust for maximum performance. In fact, BORLA is at the forefront of the movement toward responsible racing with our full line of patented, award and race-winning racing mufflers that not only maintain a race engine’s power, but in some instances actually add power. This technology is incorporated into BORLA exhaust for the street, providing 7-10% increased horsepower and torque when you plant your foot, and improved gas mileage at cruising speeds.

www.Borla.com 1-877 GO-BORLA

Limited Street

K&N users would probably be surprised by the amount of air filtration testing and scientific research that goes on in K&N facilities as well as in independent laboratories. As the leader and originator of the high flow performance air filter we are always looking for new ways to provide excellent protection and maximum power for your car, truck, motorcycle, and just about anything else with an engine. In 2005 more than 1600 vehicles were tested by K&N's R&D group on dynamometers in the US, United Kingdom, and the Netherlands. In addition to these power and torque tests, we also performed more than 110 filtration tests and more than 1,200 air flow tests with our in-house state-of-the-art test equipment.

www.knfilters.com

Orme Brothers was founded by Ray, Joel, and Verl Orme, in September, 1944 as a Union 76 service station in the quiet little rural town of Northridge, California. Mostly orange groves and dirt roads, Northridge boasted celebrity homes and ranches of Walter Brennan, Monte Montana, Barbara Stanwick, Jack Oakie, and many others in the early days of Hollywood. Actually, the original Orme Brothers was a brother partnership of sheepherders in the mountains of Idaho around the turn of the century…but on to the present. Northridge, the center of the San Fernando Valley with one and one-half million people would be the sixth largest city in California if a city in itself. Two new generations of family are now involved in the business. Evolving through the automotive industry for over 50 years, the automotive parts are gone and Orme Brothers, Inc. is now a full service hose and fitting company. Our evolution thru the industry gives us a unique understanding of each performance and industrial plumbing situation. As in all industries today, technology has shaped our day to day approach to high performance and industrial applications. At Orme Brothers Inc, management and staff are committed to the latest technological advances and 'state of the art' products to insure that our customers receive the best products and technical assistance available in our industry. Any questions? E-mail us through our tech assistance hotline.

www.ormebros 818-885-1414 Toll free (877)ORME BRS

Quick Street

Brandt Racing Enterprises has been serving the High Performance Mustang enthusiast for over a Decade. The Owner, Gary Brandt, has been working at getting the most out of Mustangs for over 20 years by both Racing, and research & development of the products we sell. When you call B.R.E. for Parts, Installations, Suspension Setups or High Performance Engine development, you will always get the best personal service we have to offer you. It starts at the telephone where Amber or Christine will take your order and help you with product choices. Christine Brandt also takes care of Bookkeeping and Office operations, as well as being a valuable asset as part of the Race Crew. When it comes to quality installations we have our own ASE Certified Mechanic, Tony Merashoff, who also serves as Crew Chief on our Racing Team and keeps both cars up and running in top condition. Mechanic and Driving Apprentice, Gary Brandt Jr. (Evan), works with Tony on the installations and is also developing his skills in Our P.S.C.A. Limited Street race car as the future driver in that seat. We offer Top Quality welding from Jerome Quinell who is also one of our valued Crew members on our Racing Team. We also run a P.S.C.A. Hot Street race car in which Gary Brandt Sr. performs the driving duties in. At B.R.E., We take great pride in the fact that We are a family based business that is dedicated to both winning races and serving our customers with the best parts and prices to help them win as well. That’s why at B.R.E. We don’t just sell High Performance Parts, “WE RACE CARS.” and we hope to see you at the track.

www.brandtracing.com 661-272-2273

Trophy Bracket

Now the leader in hard core engine gaskets, SCE Gaskets was started in Dan Hunter’s (Ryan’s dad) garage in 1990 as a result of needs identified by the family’s involvement in racing, Following Hunter family roots (his grandfather built bootlegger cars) Ryan has been involved in racing since his teens working on everything from bracket cars to Top Fuel dragsters, eventually co-owning a drag boat operation with his brother Scott in the 80’s and early 90’s. The family tradition continues with Ryan’s sons Caleb and Aaron, Caleb drag races a big block 68’ Camaro, and Aaron races shifter karts.

Using clever design, CNC technology, dynamometer testing and “real world” thrashing, SCE has developed unique, patented and durable sealing solutions for race engines. Innovations include the invention of embossed copper exhaust gaskets (Pro Copper Exhaust), the first self sealing copper head gasket (Titan) and the first and only integral combustion seal in a copper head gasket (ICS Titan).

A closely held corporation, SCE can react quickly to customer and industry requirements with the highest quality materials, in house design, tooling and production. None of our products are made in China! SCE Gaskets are manufactured in our facility in Lancaster, California.

The company boasts a customer list of the most renowned engine builders and race teams in professional motorsports, as well as being the exclusive gasket supplier for several OEM racing and development programs.
Over the years customer input has helped us create new gasket offerings for professional engine builders and performance enthusiasts, we appreciate your business and comments. Please contact us at 1-661-728-9200 or e-mail us at info@scegaskets.com.

www.scegaskets.com 661-728-9200

Check out the OFFICIAL PSCA Associate Sponsors